Real answers from local, Gas Safe engineers. Browse by service or search instantly for topics like emergency plumber, boiler installation, boiler servicing, bathroom fitting, leaks, water pressure, TRVs, flushing and more.
Wakefield plus roughly a 10-mile radius: Walton, Ossett, Horbury, Normanton, Castleford, Pontefract, Sandal and Newmillerdam.
Scheduled work Mon–Sat 08:00–18:00. We provide 24/7 emergency response for urgent plumbing or heating issues.
Call or WhatsApp with a brief description and postcode. Photos help. We provide free, no-obligation quotes for planned work.
We aim to reply promptly the same day; emergencies are prioritised immediately by phone.
Yes — we’re fully insured and Gas Safe for boiler and gas work. Credentials shown on request.
Card, bank transfer and cash. Larger projects may require a stage payment schedule agreed in writing.
Yes — we use dust sheets, protect surfaces and dispose/recycle waste responsibly, leaving the site clean.
Definitely — WhatsApp is ideal for quick diagnostics and faster quoting.
We can schedule annual boiler servicing and periodic plumbing checks; ask us to set a reminder.
No problem — give us 24 hours’ notice for non-urgent work and we’ll rearrange the slot.
Yes — we can issue findings reports/invoices for insurance claims and CP12 for landlords.
We work with reliable suppliers and can special-order parts quickly where available, advising lead times upfront.
Yes. For active leaks or burst pipes we prioritise same-day emergency plumber attendance in Wakefield and nearby towns (Walton, Ossett, Horbury, Normanton, Castleford, Pontefract).
We use leak detection techniques (isolation, moisture readings, pressure tests) to trace concealed leaks, then carry out tidy repairs with minimal opening and clean reinstatement.
Absolutely. We replace tap cartridges/washer kits, repair cistern fill/flush valves, reseal wastes and stop those annoying drips that waste water and money.
If the blockage is within your property’s pipework (internal traps, branch pipes, gully), we handle it. Shared or sewer main issues are usually the water company’s responsibility — we’ll advise after inspection.
We diagnose low pressure causes (restrictors, limescale, mixers, undersized pipework) and can fit pumps, pressure-balancing valves or unvented cylinders where suitable.
Yes — sinks, waste disposals, dishwashers, washing machines, American fridge-freezers (ice/water), filtered and boiling-water taps, with tidy pipework and leak checks.
Yes. We upgrade stopcocks, add isolation valves on key branches, and can fit external outside taps with proper backflow protection.
We work with copper, MLCP and high-quality plastic push-fit, choosing the right spec for heat, pressure, and longevity. All joints are tested before handover.
We provide clear pricing up front. For scheduled jobs there’s no surprise fee; genuine out-of-hours emergencies may carry a call-out, confirmed before we set off.
Yes — parts carry manufacturer warranties and our workmanship is guaranteed. If something’s not right, we’ll return and put it right.
We survey demand for hot water/heat, property size, cylinder/loft space and water pressure. Then we specify the best combi/system/regular setup for efficient, reliable heating.
A like-for-like combi swap is typically 1 day. Conversions (e.g., regular to combi) or full central heating installs can take 2–3 days depending on radiator/pipework changes.
Often, yes. We assess incoming mains pressure/flow, flue route, condensate, gas pipe sizing and ventilation before confirming a regular-to-combi conversion.
Yes — we install smart thermostats, zoning and TRVs for comfort scheduling and energy savings, set up with your Wi-Fi and app.
Yes. We perform a chemical clean or power flush (as appropriate), dose with inhibitor and fit a magnetic filter to protect the new heat exchanger.
We work with leading UK boiler brands. After survey we’ll recommend models that suit output (kW), warranty, parts availability and budget.
Yes — we handle Benchmark/commissioning, warranty registration and deliver gas safety and installation documentation for your records.
Yes — we can add/move radiators, fit TRVs, balance the system and advise on correct sizing for each room’s heat loss.
We take care of compliant flue routes, condensate termination, gas pipe sizing and all Building Regulations requirements as Gas Safe engineers.
We remove and dispose/recycle the old appliance and packaging, leaving the area clean and ready to use.
Annually. An annual boiler service keeps warranties valid, checks combustion safety and improves reliability/efficiency.
Flue gas analysis, burner/heat-exchanger clean as required, safety device tests, gas pressure checks, condensate trap clean, seals inspection and system health report.
We test for PRV discharge, expansion vessel issues, micro-leaks and radiators. We repair and repressurise, then balance and dose with inhibitor.
Yes — we prioritise no-heat/no-hot-water breakdowns and aim for same-day diagnostics where possible.
Yes. We interrogate fault codes, check sensors/PCBs/fans/ignition, and run live tests to find intermittent issues.
We stock typical valves, electrodes, pumps, sensors and seals. If a special part’s needed, we source quickly from local suppliers.
Yes — we service unvented hot water cylinders (where installed) and provide landlord Gas Safety (CP12) checks.
A clean, correctly set boiler with optimal CO/CO₂ readings and balanced radiators generally runs more efficiently, helping lower energy use.
We work on most ages/brands. For very old or unsafe units, we’ll advise on cost-effective repair vs replacement.
You’ll get a service/repair report, any test results and safety notes, plus a quote for preventative work if recommended.
Yes — we advise on practical layouts, fixture choices and ventilation for your space and budget, then provide a clear plan and quote.
Typically 5–10 working days depending on tiling, panel choice, layouts and any remedial work (subfloor, walls, pipe reroutes).
Either. We can supply and fit or fit customer-supplied items, checking compatibility (traps, wastes, pressures) before installation.
Yes — we fit low-profile trays, wet-room formers, tanking systems and correct falls to wastes for watertight performance.
Absolutely. Acrylic/laminate wall panels are quicker, easier to clean and ideal for a modern look with fewer grout lines.
We coordinate qualified electricians for lighting, fans, underfloor heating and ensure effective extract ventilation to prevent mould.
We plan works to minimise downtime and keep a WC available where possible; we’ll agree the sequence before we start.
Yes — we install towel radiators, adjust pipework routes and balance heating after the bathroom is completed.
We use tanking membranes/backer boards, seal trays/enclosures carefully and finish with quality silicone to prevent leaks.
Yes — fixtures carry manufacturer warranties and our workmanship is guaranteed. We provide care tips at handover to keep finishes pristine.
Phone: 07759 358927
WhatsApp: 07759 358927
Email: chriskeane9468@aol.com
Address: 40 Elmwood Drive, Walton, Wakefield, WF2 6LW, UK
Hours: Mon–Sat 08:00–18:00 (Emergency line 24/7)
Wakefield
Castleford
Horbury
Normanton
Pontefract
Sandal
Walton
Ossett
